Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 68)

3 Paper and Original Information
3-4 bizhub PRO 920
Pap
e
r
a
nd Or
igin
al I
n
fo
rm
at
ion
Ch
ap
te
r 3
Tray/ Exit Tray Capacity
Paper trays Capacity
Tray 1 and 2 (Main body trays) 500 sheets (20 lb)
Tray 3 (Main body tray) 1,000 sheets (20 lb)
Tray 4 (Large capacity unit LU-403) 4,000 sheets (20 lb)
Tray 4 (Large capacity unit LU-404) 4,000 sheets (20 lb)
Multi-sheet bypass tray 150 sheets (20 lb)
1 sheet each for OHP transparencies
Equipment Capacity
ADU Unlimited
Finisher
FS-509/516 Secondary
(sub) tray 200 sheets
Primary
(main) tray 500 sheets (5.5”Ч8.5”, 5.5”Ч8.5”R, A5, A5R)
3,000 sheets (8.5”Ч11”, 8.5”Ч11”R, A4, A4R, B5, B5R)
1,500 sheets (11”Ч17”, 8.5”Ч14”, A3, B4)
* See the table below for Staple and Z-Fold mode.
Finisher FS-604 Secondary
(sub) tray 200 sheets
Primary
(main) tray 500 sheets (A5, A5R, 5.5”Ч8.5”, 5.5”Ч8.5”R)
2,500 sheets (A4, A4R, B5, B5R, 8.5”Ч11”, 8.5”Ч11”R)
1,500 sheets (A3, B4, 11”Ч17”, 8.5”Ч14”)
* See the table below for Staple and Z-Fold mode.
Fold&Staple
tray Approx. 100 sheets
Half Fold: 33 sets for 3-sheet-folded booklet (99 sheets,
396 pages) (25 sets for 8.5”×11”R, A4R)
Fold&Staple: 20 sets for 5-sheet-folded booklet (100
sheets, 400 pages) (15 sets for 8.5”×11”R, A4R), or
5 sets for 20-sheet-folded booklet (100 sheets, 400 pages)
* Maximum number of folded sheet is 3 for Half Fold, and
20 for Fold&Staple mode.
Post inserter PI-501 Approx. 200 sheets 53 lb (200 g/m
2
) or within 30 mm thick
Z folding unit ZU-602 Punch: Unlimited
Z-Fold: 1 sheet only
Trimmer unit TU-501 Approx. 512 sheets
100 sets max. for 2~5-sheet-folded booklet
50 sets max. for 6~10-sheet-folded booklet
32 sets max. for 11~16-sheet-folded booklet
* Maximum number of folded sheet is 3 for Half Fold and
Trimming, and 16 for Fold&Staple and Trimming.