Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 358)

12 Finishing / Paper Fold
12-32 bizhub PRO 920
Finishin
g / Pap
e
r
F
o
ld
Ch
ap
te
r 12
To use two copiers in tandem
0 The combination of the two copiers can be either the two bizhub PRO
920 copiers.
0 Two copiers should have the same optional configuration.
0 The copier with the [Tandem] key highlighted on the Basic Screen will be
the master machine, turning both copiers into the tandem mode.
0 Select the copying conditions, scan originals, and press [Start] on the
master machine to operate both copiers in tandem to complete a job.
0 This machine is provided with an Distribution Recovery mode, which
functions when trouble occurs in either the master or tandem machine to
allow the trouble-free copier to complete the job.
0 The image data stored in HDD can be output in tandem mode copying.
0 Tandem mode is unavailable if Enhance Security mode is activated.
1
Turn power on the two copiers.
– Confirm that both copiers are ready to copy with the Basic Screen
displayed.
2
Touch [Tandem] on the Basic Screen of either copier.
– If the direct selection screen is specified as the Basic Screen, the
Tandem key will be displayed in the setting image area.
The Tandem Function Setting Screen will be displayed.