Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 189)

Basic Job Settings 9
bizhub PRO 920 9-21
Basic Job Set
tings
Ch
ap
te
r 9
Touch [X]/[Y]/[Z] which indicates horizontal/vertical/index size to
highlight it, then enter the desired size for each. Entered size should
fall within 100 mm × 148 mm ~ 314 mm × 460 mm, and 0 ~ 99 mm
for tab extension.
When all settings are completed, touch [OK] to return to the Change
Bypass Tray Setting Screen.
7
Touch [OK] to restore the Paper setting menu.
The specified paper condition will be displayed on the bypass tray key.
8
Touch [OK] on the Paper setting menu.
The Basic Screen will be restored.
? Do you want to start copying immediately?
% You don’t have to touch [OK] to restore the Basic Screen. Position
original(s) directly, then press [Start].
9
Select additional copy conditions, as required.
“Auto” will be displayed on the Zoom key to show its activity.