Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 231)

Original Setting 10
bizhub PRO 920 10-21
Or
igin
a
l Se
ttin
g
Chap
te
r 10
Copying Non-Standard Size Originals (Custom Size / Tab Paper)
The copier usually detects the standard size of originals fed through ADF or
positioned on the original glass (Standard Size mode).
Use Custom Size mode to specify the scanning area manually for copying or
printing special size originals. Use Tab Paper mode to copy a tabbed origi-
nal, including the image of the tab part, onto tabbed copy paper.
0 Use Full Area on the Custom Size Screen for small originals that cannot
be copied in Standard Size mode.
0 Tab extension width for tabbed originals: 12.5 mm or less
Tabbed copy paper size and tab extension width can be specified in pa-
per type/size setting.
1
Touch [Combine Originals] on the Basic Screen.
The Combine Originals setting menu will be displayed.
2
Touch [Original Size].
The Original Size Screen will be displayed.
3
Touch [Custom Size] or [Tab Paper].
The Custom Size Screen or Tab Paper Screen will be displayed.