Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 160)

8 Before Making Copies
8-14 bizhub PRO 920
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 8
To position originals in Z-Folded mode
Z-Folded original mode detects the folded original size without using the size
detection sensor of the ADF.
0 Before placing originals in the tray, be sure the document feeder is closed
fully.
1
Arrange originals in order.
2
Position original(s) FACE UP in the document feeder tray.
– Place two-sided originals with page one FACE UP. Up to 100 orig-
inals can be set at a time.
3
Adjust paper guides.
2
Reminder
Do not set more than 100 originals or over the limit line indicated on the
paper guides; otherwise a paper misfeed will occur.
Once closed, do not open the document feeder, otherwise the selected
copy conditions may be altered automatically.
!
Detail
To use the Z-Folded mode, see procedure on page 10-14.
For available original sizes in Z-Folded mode, see page 3-12.