Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 41)

Preparation for Use 2
bizhub PRO 920 2-9
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 2
No. Name Description
1 [Job List] key Touched to display the Job List Screen.
2 Date and time indicator Displays the present date and time, and changes to
the timer indication 5 minutes before the Weekly
Timer functions if activated.
3 Message area Displays messages concerning toner supply,
preventive maintenance, and printing job.
4 [Basic] tab Touched to specify the basic copy settings.
5 [Combine Originals] tab Touched to use the combination function, and to
specify the condition of originals to be scanned.
6 [Original Image Type] tab Touched to specify the original image type.
7 [Application] tab Touched to select various application functions.
8 Memory indicator Indicates the remaining memory available for the
next operation.
9 Set quantity indicator Indicates the print quantity entered from the control
panel keypad.
10 [Simplex/Duplex] key Touched to select the copy mode (1-1, 1-2, 2-1, or
2-2).
11 Image area Displays an icon indicating the position of staple(s),
punch holes when specified in the finishing mode,
etc.
12 [Zoom] key Touched to select the preset zoom, user-set zoom,
or XY zoom mode.
13 [Finishing] key Touched to specify the desired finishing mode oth-
er than the paper fold modes specified below.
14 [Paper] key Touched to select the desired paper size or Auto
Paper Select function, and also to specify the paper
type and size of the paper loaded in the Multi-sheet
bypass tray.
15 [Paper Fold] key Touched to use Half Fold, Fold&Staple, Trimming,
Z-Fold, Letter Fold In, or Letter Fold Out function.
16 [Density] key Touched to specify the desired exposure level, to
activate the automatic exposure function, to select
the preset density, or to specify the background
density.
17 [Box] key Touched to store the scanned image data on HDD,
or to recall the stored data from HDD for printing.
18 [Separate Scan] key Touched to store scanned images into memory.
19 Machine status icons Indicate the current machine status.
20 Setting image area Illustrates various settings during the operation.
If the direct selection screen is specified as the Ba-
sic Screen, this area displays the previous or cur-
rent job information only. Switching to the
illustrational information is unavailable, as in the
user setting provided for the layer selection screen.