Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 290)

11 Applications
11-56 bizhub PRO 920
Applications
Chap
te
r 11
11.16 Erasing Outside of Original (Non-Image Area Erase)
The Non-Image Area Erase mode is used to copy non standard or special
originals, such as books, magazines, paste-ups, graphs, thick or thin mate-
rials, etc. from the original glass. The exposed glass area outside the borders
of the original will not be copied.
2
Note
This function may not operate properly if the lighting in the work place is
directly over the original glass. In this case, consult your service repre-
sentative about an appropriate place for installation.
To set Non-Image Area Erase function
0 Use the original glass only. Keep ADF open throughout the procedure.
0 Original size should be larger than 10 mm × 10 mm.
0 Auto Zoom and Auto Paper Select are automatically released.
0 Copy mode is automatically set to 1-1. When selecting 1-2 mode, Sepa-
rate Scan mode will function automatically.
General copying
Non-Image Area Erase