Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 165)

Before Making Copies 8
bizhub PRO 920 8-19
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 8
8.5 Setting Job During Warmup
While the copier is warming up after power is turned on, select copy condi-
tions and start scanning so that the copier may start printing immediately the
copier engine is ready.
To set job during warmup
1
Turn on the main power switch and sub power switch of the machine.
2
On the Basic Screen, check that the message “Ready to copy reserve”
is displayed in the message area.
3
Set the desired copy conditions, enter the print quantity, then position
original(s) FACE UP in the ADF or FACE DOWN on the original glass.
4
Press [Start] to start scanning.
– When scanning is completed, the message “Ready to reserve JOB”
and [Job Reserve] key will be displayed on the screen.