Konica Minolta BIZHUB PRO bizhubPRO920 User Manual
Page 201
Basic Job Settings
9
bizhub PRO 920
9-33
Basic Job Set
tings
Ch
ap
te
r 9
2
Position original FACE DOWN on the original glass.
–
Open the ADF. Position original FACE DOWN according to the orig-
inal direction icon displayed on the Basic Screen, then close the
ADF.
Be sure to start from the first page.
3
Touch [Simplex/Duplex] on the Basic Screen.
The Simplex/Duplex setting menu will be displayed.
4
Touch [1-2] to highlight it, then touch [OK].
The Basic Screen will be restored, with the [Separate Scan] key auto-
matically highlighted.
5
Select additional copy conditions, as desired.
6
Press [Start] to scan.
The front side image of the double-sided copy will be scanned into
memory.
?
Do you want to stop scanning?
% Press [Stop]. The scanned image will be cleared.
7
Replace the original on the original glass with the back side image orig-
inal, then press [Start].