Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 289)

Applications 11
bizhub PRO 920 11-55
Applications
Chap
te
r 11
5
Specify the erasure amount in the selected mode.
– To specify “Frame Erase/All Sides” amount, use the touch panel
keypad or up/down arrow key to enter the desired erasure amount
of the Top, Right, Left, and Bottom sides collectively, from 1 to 300
mm in 1 mm increments.
– To specify “Frame Erase/Each Side” amount, touch [Top], [Right],
[Left], or [Bottom] to highlight the key and current amount indicated
in the illustration area.
Use the touch panel keypad or up/down arrow key to enter the de-
sired erasure amount, from 1 to 300 mm in 1 mm increments.
– To specify “Center Erase” amount, use the touch panel keypad or
up/down arrow key to enter the desired erasure amount, from 1 to
99 mm in 1 mm increments.
6
Touch [OK] repeatedly till the Application Screen is restored.
? Do you want to cancel changes to the settings?
% Touch [Cancel].
? Do you want to cancel the Frame/Center Erase function?
% Touch [Off].
7
Enter the desired print quantity, position original(s), then press [Start].