Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 153)

Before Making Copies 8
bizhub PRO 920 8-7
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 8
8.2 How to Make a Basic Copy
Follow the procedure below to make a basic copy.
2
Note
The following procedure is basic and not always applicable to the oper-
ation of selected copy conditions. When using a specific function, be
sure to follow the procedure described in each section.
!
Detail
This machine provides a layer selection screen as the Basic Screen.
Touching a screen key will display the subsequent screen specific to that
function for manual setting.
The Basic Screen can also be changed to the direct selection screen,
which allows you to view other basic settings while making a setting
change. For details, contact your service representative.
To make a basic copy
1
Display the Basic Screen.
Initially the Basic Screen appears on the touch panel.
2
Set copy conditions as desired.
– The following settings are available from the Basic Screen.
Basic (See Section 9.)
Combine Originals (See page 10-6.)
Original Image Type (See page 10-23.)
Application (See Section 11.)
Finishing (See Section 12.)
Paper Fold (See Section 12.)