Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 181)

Basic Job Settings 9
bizhub PRO 920 9-13
Basic Job Set
tings
Ch
ap
te
r 9
To Specify Desired Paper Size (Auto Zoom)
When a paper size is specified on the touch panel, an appropriate reduction
or enlargement ratio will be selected automatically according to the original
size detected from the ADF or the original glass.
!
Detail
Auto Zoom can also be activated by touching [Auto Zoom] on the Zoom
setting menu. In this case, the paper size specified for the tray of top pri-
ority will be selected automatically. See page 9-24 for details.
To copy in full size (×1.000) mode using selected paper size, see
page 9-23.
To set Auto Zoom
0 Auto Zoom is incompatible with Auto Paper Select, however, Rotation is
available.
0 Auto Zoom will not function if selected tray is specified as non-standard
size.
1
Touch [Paper] on the Basic Screen.
The Paper setting menu will be displayed.
2
Touch a tray key on the menu to select the desired paper size.
3
Touch [OK] on the Paper setting menu.
The Basic Screen will be restored.
? Do you want to start copying immediately?
% You don’t have to touch [OK] to restore the Basic Screen. Position
original(s) directly, then press [Start].