Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 88)

4 Supplies & Handling
4-10 bizhub PRO 920
Su
ppli
e
s &
Hand
ling
Ch
apt
e
r 4
Loading Tabbed Sheets in LCU (LU-403/LU-404)
0 The tab extension width should be 12.5 mm or less.
0 Be sure that the machine is powered on before loading paper in the LCU.
Without the power turned on, the LCU bottom plate will not function.
1
Open the LCU top door.
2
Press the paper loading button to lower the LCU bottom plate.
3
Load the tabbed sheets into the LCU as illustrated above.
4
Close the LCU top door.
!
Detail
To load the tabbed sheets into LCU, contact your service representative
to position the rear stopper for the paper size to be loaded.
Rear
Front
Rear
Front
Example: 3 tabbed sheets loaded in position for one finished set
Example: 9 tabbed sheets loaded in position for 3 finished sets
Printed
side
1st TAB
3rd TAB
ONE FINISHED SET
3 FINISHED SETS
Printed
side
1st TAB
1st TAB
1st TAB
3rd TAB
3rd TAB
3rd TAB
2nd TAB
2nd TAB
2nd TAB
2nd TAB