Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 38)

2 Preparation for Use
2-6 bizhub PRO 920
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 2
Control Panel Layout
1 22 21 20 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
No. Name Description
1 [Mode Memory] key Displays screens for selecting job store/job recall
functions.
2 [Access] key Sets the machine to allow copying/scanning/
printing only when the User Authentication/Account
Track password is entered.
3 [Box] key Press to store the image data in HDD of the main
body or on a PC over a network, or to recall the
stored data. The indicator of the key will light when
pressed. For details, see bizhub PRO 920 User’s
Guide - Network Scanner.
4 [Scan] key Press to scan the original images, or to specify the
address for data transmission. The indicator of the
key will light when pressed. For details, see bizhub
PRO 920 User’s Guide - Network Scanner.
5 [Copy] key Press to operate copying functions. The indicator of
the key will light when pressed.
6 Keypad Enters numeric value such as print quantity.
7 [Proof Copy] key Outputs a single set of copies to confirm whether
the current settings are selected properly.
8 [Reset] key Restores copier to the initial settings.
9 [Interrupt] key Stops copying/scanning/printing in progress to
allow a simple copying job.
10 [Stop] key Ceases the copying sequence; deletes the stored
memory.
11 [Start] key Activates each function. The Start LED lights in
green when machine operation is available, and
turns orange if any operation cannot be started.
12 Main Power indicator Lights in green when the main power switch is
turned on.