Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 355)

Finishing / Paper Fold 12
bizhub PRO 920 12-29
Finishin
g / Pap
e
r
F
o
ld
Ch
ap
te
r 12
To use finisher manually
0 Paper should be placed only in the lower tray of the post inserter. Upper
tray cannot be used.
0 Staple (1 staple / 2 staples) and Punch can be used in combination.
0 Specifications for Staple (1 staple / 2 staples)
Paper size: 11"Ч17”, 8.5”Ч14”, 8.5”Ч11”, 8.5”Ч11”R, A3, B4, A4, A4R,
B5, A5 (13 to 110 lb)
Staple capacity: FS-604; 50 sheets or less
FS-509; 50 sheets or less (11"×17”, A3) / 100 sheets or less (8.5”×11”R
to B4)
Output tray: Primary (main) tray
0 Specifications for Punch
Paper size: 11”×17” to 5.5”×8.5” (13 to 45 lb)
Tray capacity: 200 sheets or within 30 mm thick
Output tray: Primary (main) tray
0 Specifications for Fold&Staple
Paper size: 11"Ч17”, 8.5”Ч14”, 8.5”Ч11”R, A3, B4, A4R (16 to 110 lb)
Fold&Staple capacity: 20 sheets or less (20 lb paper) / 19 sheets or less
(20 lb paper) with a thick cover paper
Output tray: Folding mode tray
0 Specifications for Letter Fold
Paper size: 8.5”×11”R, A4R (16 to 20 lb)
Fold capacity: 3 sheets or less
Output tray: Folding mode tray
1
Place a set of paper in the lower tray of the post inserter.
– Staple (1 staple / 2 staples): Place paper face UP.
– Punch: Place paper face UP.
– Fold&Staple: Place the front of the finished set UP.
– Letter Fold: Place the outside of the fold UP.
– Align the guide plate with the paper.
Lower tray