Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 332)

12 Finishing / Paper Fold
12-6 bizhub PRO 920
Finishin
g / Pap
e
r
F
o
ld
Ch
ap
te
r 12
12.2 Setting Binding Direction for Duplex Copies
When setting duplex mode (1-2 / 2-2), a binding direction must be selected.
It should be set when making top-bound duplex copies (front and back sides
have the opposite side up) from right&left-bound simplex or duplex originals
(front and back sides have the same side up).
!
Detail
If you want to make right&left-bound duplex copies (front and back sides
have the same side up) from top-bound duplex originals (front and back
sides have the opposite side up), settings for duplex originals and binding
direction are needed. See page 10-10 for details.
To set binding direction for duplex copies
0 Top bind for duplex printing functions properly only when duplex mode
is selected.
0 If the machine is reset, the binding mode will go back to R&L bind.
1
Touch [Finishing] on the Basic Screen.
The Finishing setting menu will be displayed.