Konica Minolta BIZHUB PRO bizhubPRO920 - Manual (Page 43)

Preparation for Use 2
bizhub PRO 920 2-11
Be
fo
re
M
a
king
Cop
ies
Ch
ap
te
r 2
Finisher FS-509/516 (+ Punch Kit PK-505)
2
Reminder
The Primary (Main) tray gradually goes down while printed materials out-
put. DO NOT allow any object to interfere with the operation of the tray
on the left side of the finisher, as any interference may cause damage to
the finisher.
1 2
3
Finisher FS-509/516
No. Name Description
1 Finisher door Opens to the internal finisher to allow replenishing
staples and clearing mishandled paper, and also to
allow removal of waste paper punched out when
Punch kit PK-505 is installed.
2 Primary (main) tray Holds sets output in the selected finishing mode
other than specified above.
3 Secondary (sub) tray Holds sets output in Sort, Group, Face Up, or Face
Down mode.