Kenwood TM-G707 - Manual (Page 67)

61
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PACKET OPERATION
Connect this transceiver to your personal computer via a
Terminal Node Controller (TNC) {page 6}. You can send
E-mail to far away stations or obtain a variety of
information via your local bulletin boards, or you may
enjoy other Packet applications. Reference material for
starting Packet operation should be available at any
store that handles Amateur Radio equipment.
1200/ 9600 bps OPERATION
Select 1200 bps or 9600 bps for the data transfer rate,
depending on the type of your TNC.
1200 bps:
The Transmit data input (PKD) sensitivity is 40 mV
P-P
,
and the input impedance is 10 kΩ. This is suitable for a
typical 1200 bps TNC.
9600 bps:
The Transmit data input (PKD) sensitivity is 2 V
P-P
, and
the input impedance is 10 kΩ. This is suitable for most
9600 bps TNCs. Select 9600 bps if using a TNC with
dual speed capability that only has a 2 V
P-P
output.
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 19 (BPS).
3 Press [OK], then switch 1200 bps (default) or
9600 bps.
4 Press [OK] again to complete the setting and exit
Menu mode.
If you select 9600 bps, “9600” appears.
1
2