Kenwood TM-G707 - Manual (Page 64)

58
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
S-METER SQUELCH
By activating S-meter Squelch, the squelch does not
open until a signal with the same or greater strength
than the S-meter setting is received. This function is
useful to eliminate constantly resetting the squelch when
receiving weak stations that you have no interest in.
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 14 (S.SQL).
3 Press [OK], then turn the Tuning control to switch the
function ON (or OFF).
4 Press [OK] again to complete the setting and exit
Menu mode.
• The S-meter setting segments appear.
5 Turn the SQL control to select the desired S-meter
setting from the 7 levels.
■ Squelch Hang Time
When using S-meter Squelch, you may want to adjust
the time interval between when the received signals
drop and when the squelch closes.
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 15 (HNG.T).
3 Press [OK], then turn the Tuning control to select
from OFF (default), 125 ms, 250 ms and 500 ms.
4 Press [OK] again to complete the setting and exit
Menu mode.
Note: Menu No. 15 is selectable only when the S-meter Squelch is
ON.