Kenwood TM-G707 - Manual (Page 59)

53
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PROGRAMMABLE VFO
If you want, you can set limits for the minimum and
maximum frequencies that are selectable using the
Tuning control. For example, if you select 145 MHz for
the lower limit and 146 MHz for the upper limit, the
tunable range will be from 145.000 MHz to
146.995 MHz. This function will be useful if you always
check frequencies within a certain range.
Note:
◆ You cannot program the 100 kHz and subsequent digits.
◆ The exact 100 kHz and subsequent digits of the upper limit depend
on the step size selected.
◆ You can select the lower and upper limits within the allowable receive
frequency range that differs depending on the markets.
1 Press [VFO] to select VFO mode.
2 Select the desired band.
3 Press [MNU] to enter Menu mode.
4 Select Menu No. 9 (PROG.VFO).
5 Press [OK], then select the lower frequency limit.
6 Press [OK] again, then select the upper frequency
limit.
7 Press [OK] once again to complete the setting and
exit Menu mode.
1
2
1
2