Kenwood TM-G707 - Manual (Page 48)

42
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
PROGRAM SCAN
Program Scan is identical with VFO Scan except that
you select the frequency range of the scan.
■ Setting Scan Limits
You can store up to 6 scan ranges in memory
channels L1/U1 to L6/U6.
1 Select the desired band.
2 Select the desired frequency as the lower limit.
3 Press [F].
4 Select a channel in the range from L1 to L6.
5 Press [MR].
• The lower limit is stored in the channel.
6 Select the desired frequency as the upper limit.
7 Press [F].
8 Select a matching channel in the range from U1 to
U6.
• If you have selected, for example, L3 in step 4,
select U3.
9 Press [MR].
• The upper limit is stored in the channel.
10 To confirm the stored scan limits, press [MR], then
select the L and U channels.
Note:
◆ The lower limit must be lower in frequency than the upper limit.
◆ The lower and upper frequency steps must be equal.
◆ The lower and upper limits must be selected on the same band.
1 s