Kenwood TM-G707 - Manual (Page 2)

N-1
THANK YOU!
We are grateful you decided to purchase this
KENWOOD FM transceiver. This series of mobile
transceivers was developed to satisfy the requirement
for a compact rig that’s simple to operate yet contains
numerous sophisticated features. The dual band
operation will be appreciated by hams who want access
to VHF and UHF bands with a transceiver smaller than
some single banders.
KENWOOD believes that the compact size, coupled with
the reasonable cost, will meet your satisfaction.
MODELS COVERED BY THIS MANUAL
The models listed below are covered by this manual.
TM-G707A: 144/440 MHz FM Dual Bander
(U.S.A./ Canada)
TM-G707A: 144/430 MHz FM Dual Bander
(General market)
TM-G707E: 144/430 MHz FM Dual Bander
(Europe)
FEATURES
This transceiver has the following main features.
• Enhanced Programmable Memory (PM) channels
store virtually entire current operating environments
for your quick recall.
• Contains a total of 180 memory channels
programmable with separate receive and transmit
frequencies as well as simplex frequencies, and other
various data.
• Allows each memory channel to be named using up
to 7 alphanumeric characters; you may assign a
name such as a callsign or repeater name.
• Provides Easy Operation mode for hams who want to
use only the basic functions for now.
• If programmed, the built-in Continuous Tone Coded
Squelch System (CTCSS) rejects unwanted calls
from other persons who are using the same
frequency.
• Equipped with an easy-to-read large LCD with
alpha-numeric display capability.
• The compact front panel is detachable from the main
unit. If used with an optional front panel kit, the
separated panel can be mounted in a convenient
different place.
• The dedicated DATA connector is available for
1200 bps or 9600 bps Packet Operation.