Kenwood TM-G707 - Manual (Page 25)

19
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
MENU SET-UP
WHAT IS A MENU?
Many functions on this transceiver are selected or
configured via a software-controlled Menu instead of
physical controls on the transceiver. Once familiar with
the Menu system, you will appreciate the versatility it
offers.
MENU ACCESS
1 Select the desired band.
• For some Menu Nos., you can select a different setting
on each band.
2 Press [MNU] to enter Menu mode.
• The last Menu No. used appears.
3 Turn the Tuning control, or press Mic [UP]/ [DWN], to
select the Menu No.
• “ESC” and “OK” appear as button labels.
• To cancel the selection and restore the previous display,
press [ESC].
4 Press [OK].
• Depending on Menu Nos., “s” also appears. For the
subsequent steps, see the appropriate sections in this
manual.
5 Turn the Tuning control, or press Mic [UP]/ [DWN], to
switch the selection.
6 Press [OK] again to complete the setting and exit
Menu mode.
Note: As required, operate keys or the Tuning control in each step within
approximately 10 seconds, or the previous mode will be restored.