Konica Minolta Chroma Meter CS-200 - Manual (Page 83)

81
M
ea
su
re
m
en
t
Pr
ep
ara
tio
n
5.
Use close-up lens, select measuring
angle, adjust finder diopter and focus.
For more details on each operation, see p.88.
6.
Press Measurement button
to start measurement.
Now starts measurement.
Measurement value appears on
of LCD after measurement is completed.
After measurement, do not switch OFF
until measurement value appears.
Doing so may break stored data.
This measurement is corrected with user
calibration value for selected calibration channel.
7.
Press ENTER key.
After “ PLEASE WAIT...” appears, measurement
value has been set as target color.
When “ PLEASE WAIT...” appears, do not
switch OFF. Doing so may break stored data.
8.
Press ESC key to return to
measurement screen.
T
A
R
G
E
T
CH01:Display*1
Lv 90.41
cd/m 2
x 0.4174
y 0.4237
<
MODE
>
SINGLE
[ SFT]  [ 2° ]
<
ANGL
>
1° VIEW
<
SPD
>
AUTO
<
SYNC
>
200.00Hz
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
Lv 90.41
x 0.4174
y 0.4237
CH
01 :Display*1
Lv ------
cd/m 2
x ------
y ------
SELECT MEH DATA
OR MEASURE.
NEXT : [ENTER]
[ SFT]  [ 2° ]
<
ANGL
>
1° VIEW
<
SPD
>
AUTO
<
SYNC
>
NO SYNC
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
Lv 90.41
x 0.4174
y 0.4237
CH 01 :
<
DEFAULT
>
Lv ------
cd/m 2
x ------
y ------
<
MODE
>
SINGLE
[ SFT]  [ 2° ]
<
ANGL
>
1° VIEW
<
SPD
>
AUTO
<
SYNC
>
NO SYNC
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
M000 :(NO DATA)
Lv ------
x ------
y ------