Konica Minolta Chroma Meter CS-200 User Manual
Page 33
31
S
e
tt
in
g
5.
Press either
or key to move
inversion cursor from [NO SYNC]
to [SYNC] so that light source
pulse frequency can be entered.
6.
Press either
or
key
to set arbitrary value.
key: 0 to 9 (0 to 2 in 100 position) in descending
order, decimal point and space available.If kept
pressed, numerical value continuously increases.
key: 9 to 0 (2 to 0 in 100 position) in
ascending order, decimal point and space
available. If kept pressed, numerical
value continuously becomes small.
7.
Press
key to move cursor
to second digit position.
8.
Repeat the same procedures
6
. and
7
. as necessary.
Selectable frequency range is from 40.00Hz
to 200.00Hz. Press
ESC to stop.
9.
Press
ENTER
key to show