Konica Minolta Chroma Meter CS-200 - Manual (Page 20)

18
In
st
all
in
g LCD Screen
Measurement Screen
CH00 :
<
DEFAULT
>
<
PEAK
>
Lv 7.09
cd/m 2
x 0.3369
y 0.3256
<
MODE
>
SINGLE
[ ]  [ 2° ]
<
ANGL
>
1° VIEW
<
SPD
>
AUTO
<
SYNC
>
NO SYNC
<
LENS
>
STANDARD
<
MEM
>
AUTO NUM
<
MEMORY DATA
>
M001 : SAMPLE1
Lv 38.09
x 0.4039
y 0.3815
Setting status in this instrument is dis-
played.
Currently selected measuring angle is
displayed.(1°,0.2°,0.1°)(p.88)
Currently selected measuring time is
displayed.(AUTO,LTD.AUTO, S-FAST,
FAST, SLOW, S-SLOW, MANU)(p.28)
Synchronization frequency is displayed
when internal sync measurement mode
is set; NO SYNC is displayed when it is
not set.(p.30)
Currently selected lens type is displayed
.(STANDARD,No.107,No.122)(p.40)
Update method for directory to store
measurement value is displayed.(AUTO
NUM,MAN NUM,AUTOSAVE)(p.46)
Measurement
value ID name
(p.92)
Stored data is displayed.(p.90)
Currently selected observer angle is
displayed.(2°,10°)(p.32)
Battery level mark ( , )(p.24)
 is displayed when the finder shutter is set to au-
tomatically close for every measurement;  is dis-
played when set to always open.(p.48)
[SFT] is displayed when this instrument is in SHIFT
mode; [ ] is displayed when SHIFT mode is released.
Memory channel
SINGLE is displayed when
the measurement mode
is set to “Single measure-
ment”; CONT. is displayed
when set to normal screen
for “Continuous mode”.
(p.42)
Nothing is displayed here
when set to or
for“Continuous
mode”.
Measurement result
is displayed in the
currently selected
color space. (L
v
xy,
L
v
u'v', L
v
T∆uv,
XYZ ,Dominant
wavelength)(p.34)
CH ID name(p.74)
Calibration channel(p.62)
is displayed when the mea-
surement result was obtained at
for “Continuous mode”;
is displayed when the mea-
surement result was obtained at LEY> for “Continuous mode”.(p.44)
Nothing is displayed here when it was
obtained at “Single measurement” or
normal screen for “Continuous mode”.