Konica Minolta Chroma Meter CS-200 - Manual (Page 27)

25
In
st
all
in
g Placing Batteries
1.
Make sure that power switch is
OFF (slided to [O] mark side).
2.
Open battery chamber cover while
pressing and sliding mark to the
direction shown in illustration.
3.
Place 4 AA size batteries
following polarity indication
in battery chamber.
Do no touch or short terminals in
battery chamber. Doing so may cause
breakage of this instrument.
Use alkaline-manganese, lithium, or
nickel-metal-hydride batteries.
4.
Slide battery chamber cover to
the direction shown in illustration
and close until clicking.