Konica Minolta 7130 - Manual (Page 81)

3-31
Output Mode for Machine without Finisher
This section describes the output modes for the copier without a Finisher.
The Non-sort mode is initially selected.
1 Non-sort mode copies the original set in amounts determined by the print quantity
setting, then outputs sorted sets normally.
2 Rotation sort mode rotates every other set by 90° upon exit, provided the same paper
size is loaded in two trays, one tray with paper loaded in portrait orientation and the
other tray with paper loaded in landscape orientation, e.g., 8.5”x11” and 8.5”x11”R.
3 Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
4 Rotation group mode rotates every other grouped set by 90° upon exit, provided the
same paper size is loaded in two trays, one tray with paper loaded in portrait orientation
and the other tray with paper loaded in landscape orientation, e.g., 8.5”x11” and
8.5”x11”R.
>>>Specification for Output Modes without Finisher<<<
❒ Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet,
Transparency, Image Insert, Repeat, AUTO Layout, Non-Image Area Erase, Stamp
(Numbering)
❒ Incompatible with Rotation sort mode: Sheet/Cover Insertion, Booklet,
Transparency, Special Original (Mixed Original), Repeat, AUTO Layout, Non-Image
Area Erase
❒ Incompatible with Rotation group mode: Using platen glass (unless Chapter with
Platen store mode, Upside down, Image Shift, or Stamp (excluding Numbering) is
used), Proof Copy, Sheet/Cover Insertion, Booklet, Transparency, Image Insert,
Special Original (Mixed Original), Repeat, AUTO Layout, Non-Image Area Erase,
Stamp (Numbering)
3
2
1
Originals
Rotation sort Group Rotation group Non-sort (default)
Example:
3-set copies
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode