Konica Minolta 7130 - Manual (Page 63)

Selecting Magnification Ratio (Lens Mode) (continued)
3-13
To Copy in Fixed Magnification Mode (RE)
Use the 6 preset ratios (0.50, 0.65, 0.77, 1.29, 1.55, 2.00) and 3 user preset ratios to
increase or decrease magnification in fixed amounts.
>>> Specification for Fixed Magnification Mode <<<
Incompatible Conditions: AMS, Repeat mode in Repeat, Reduce & Shift in Image
Shift
1.
Touch RE on the Basic Screen.
The popup menu for selecting the desired preset/user preset ratio will be displayed.
Reminder!
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
2.
Select the desired magnification.
DETAILS
Touching any key on the popup menu will momentarily highlight that key,
then the popup menu will disappear automatically.
The selected ratio will be displayed on the Basic Screen.
Three user preset ratios are adjustable by the Key Operator. See p. 11-17.
3.
Select additional copy conditions, as desired.
4.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
5.
Position original(s).
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
6.
Press [START].
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode