Konica Minolta 7130 - Manual (Page 278)

11-42
[12] Memory Switch
This function allows you to change the Memory Settings listed below. See pp. 11-
44~11-46 for details on Memory Settings.
SW No. Item Setting (default is underlined)
No. 01: Auto reset timer OFF / 30 sec. / 60 sec. / 90 sec. / 120 sec./
150 sec. / 180 sec. / 210 sec. / 240 sec. /
270 sec. / 300 sec.
No. 02: AUTO RESET effect Full-Auto / Initial
No. 03: Load RADF effect RADF / RADF+Auto Reset
No. 04: Non Image A. Erase ON/ APS/AMS only
No. 05: RADF frame erasure None / 1mm / 2mm / 3mm / 4mm / 5mm
No. 06: Auto tray switch OFF / ON
No. 07: Platen APS OFF / ON
No. 08: RADF APS OFF / ON
No. 09: ATS/APS (Bypass) OFF / ON
No. 10: ATS/APS SW (Tray 1) OFF / ON
No. 11: ATS/APS SW (Tray 2) OFF / ON
No. 12: ATS/APS SW (Tray 3) OFF / ON
No. 13: ATS/APS SW (Tray 4) OFF / ON
No. 14: Platen AMS OFF / ON
No. 15: RADF AMS OFF / ON
No. 16: Staple mode reset OFF / ON
No. 17: Key click sound OFF / Low / High
No. 18: Job memory recall OFF / ON
No. 19: Sheet insertion Tray 1 / Tray 2 / Tray 3 / Tray 4 / Bypass
No. 20: 5.5x8.5 orig.type Landscape / Portrait
No. 21: Rotation OFF / ON / APS/AMS/Reduce / APS/AMS
only / APS only
No. 22: 1 SHOT indication 1 sec. / 2 sec. / 3 sec. / 4 sec. / 5 sec.
No. 23: AUTO START OFF / ON
No. 24: No- printing timer OFF / 15 sec. / 30 sec. / 60 sec. / 90 sec.
No. 25: Power save key Power Save / Shut Off
No. 26: Bypass tray size Standard size / Non standard size