Konica Minolta 7130 - Manual (Page 78)

Copying Using Memory (continued)
3-28
4.
Position original(s) after completing the scan for the current job.
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
5.
Press [START] to start scanning for the reserve job.
DETAILS
When setting more than one reserve job, the next reserve job setting will
be available after the copier starts to scan for the previous reserve job.
When completed, the Basic Screen for the current printing job will be restored.
Repeat steps 2 to 5 to reserve more than one job.
6.
Copying of the reserve job will start automatically after completing the
current job.
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.