Konica Minolta 7130 - Manual (Page 249)

[2] Copier Initial (continued)
11-13
Output Mode Initial Setting Screen Output Mode Initial Setting Screen Staple Location Initial Setting Screen
(machine with Inner tray)
(machine with Finisher)
Procedure
1 Touch 2. Copier Initial to display the Copier Initial Setting Menu Screen, then touch 5.
Output to display the Output Mode Initial Setting Screen.
2 For the machine with Finisher, perform the following operation and proceed to step 5.
To select the exit tray, touch TRAY 1 or TRAY 2.
To select the Output mode, touch SORT, GROUP, or STAPLE.
NOTES:
1. If STAPLE is selected, SORT is automatically highlighted.
2. If selecting Non-sort mode, do not highlight any of the SORT, GROUP,
or STAPLE.
To select the desired staple location, touch STAPLE SET. Touch the desired location
on the Staple Location Initial Setting Screen, and touch OK.
You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
3 For the machine with Inner tray, perform the following operation and proceed to step 5.
To select the exit tray, touch TRAY 1 or TRAY 2.
To select the Output mode, touch GROUP, ROTATION SORT, or ROTATION GROUP.
You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
4 For the machine without Finisher, perform the following operation and proceed to step
5.
To select the Output mode, touch GROUP, ROTATION SORT, or ROTATION GROUP.
You can also select on/off of the Automatic rotation initial setting. To release the
Automatic rotation mode, touch AUTO so that it is no longer highlighted.
5 Touch OK to complete the setting and return to the Copier Initial Setting Menu Screen.
If other copier initial setting changes are required, touch the desired key.
6 Touch RETURN to restore the Key Operator Mode Screen.
7 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode