Konica Minolta 7130 - Manual (Page 144)

Inserting Sheets and Covers (Sheet/Cover Insertion) (continued)
8-6
7.
Enter the page number.
Use the control panel keypad to enter the page number of insertion location.
Touch SET after each entry to move to the next key.
To clear an incorrect entry, touch DELETE or press [# (CLEAR QTY.)]. The insertion
location will be deleted.
HINT
See p. 8-7 for details on entering page numbers.
Touch OK to complete the page setting and return to the Sheet/Cover Insertion
Screen.
8
. When all settings are completed, touch OK to return to the Application
Selection Screen.
The Basic Screen will be restored.
9.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
10.
Position originals FACE UP in the document feeder.
HINTS
• For details on positioning originals, see p. 3-2.
• Use RADF store mode (p. 3-24 to p. 3-26) when the original count
exceeds 50.
11.
Press [START].
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.