Setting print quantity, To set print quantity, To change print quantity – Konica Minolta 7130 User Manual
Page 57: Press [ # (clear qty.), Enter the correct quantity
3-7
Setting Print Quantity
This section describes how to set or change print quantity.
To Set Print Quantity
The copier is initially set to copy the original set in amounts determined by the print
quantity setting, then outputs sorted sets.
1.
Enter the desired print quantity on the control panel keypad.
Entered quantity will be displayed on the touch panel.
To Change Print Quantity
Follow the procedure below to change the print quantity after it has been entered.
1.
Press [# (CLEAR QTY.)].
The quantity displayed on the touch panel will return to 1.
2.
Enter the correct quantity.
Entered quantity will be displayed on the touch panel.
2
3
1
5
6
4
8
9
7
0
CLEAR QTY.
CHECK
HELP
AUTO RESET
OUTPUT
APPLICATION
SCANNER / PRINTER
FAX
DATA
2
3
1
5
6
4
8
9
7
0
CLEAR QTY.
CHECK
HELP
AUTO RESET
OUTPUT
APPLICATION
SCANNER / PRINTER
FAX
DATA
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode