Konica Minolta 7130 - Manual (Page 265)

11-29
[7] Panel Contrast
Use this feature to adjust the level of brightness of the touch screen portion of the
control panel, and also the volume of the touch key.
NOTE:
The control panel contrast feature can be adjusted from the Help Screen
provided that the feature setting is activated by service. When the Control
panel contrast key is pressed, the Contrast adjustment screen will be
displayed. Contact your service representative if the feature is required.
Key Operator Mode Screen Panel Contrast Screen
Procedure
1 Touch [7] Panel contrast on the Key Operator Mode Screen to display the Panel
Contrast Screen.
2 Adjust the Panel contrast and Backlight contrast, as desired.
Touch DARK, NOR., or LIGHT to make the panel or backlight contrast dimmer or
brighter than the current condition.
3 Touch RETURN to complete the setting and return to the Key Operator Mode Screen.
4 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode