Konica Minolta 7130 - Manual (Page 251)

11-15
[3] Preset Key
Set two userset density levels and three USERSETs of magnification.
[1] Density
Output copying samples from 16 density levels from Lighter to Normal or Normal to
Darker, then select the desired exposure and program it as USER1.
The programmed copy density can be recalled by selecting USER1 on the Basic
Screen.
Preset Key Setting Menu Screen Userset Density Selection Screen
Procedure
1 Touch [3] Preset key on the Key Operator Mode Screen to display the Preset Key
Setting Menu Screen.
2 Touch [1] Density to display the Userset Density Selection Screen.
3 Place the original on the platen glass or in the RADF.
4 Touch Userset1 or Userset2. The Userset Density Darker Setting Screen will be
displayed.
5 To program Userset (1 or 2) to a darker level, perform the following operation, then
proceed to step 7.
Userset Density Darker Setting Screen
Touch No.1 1~4, No.2 5~8, No.3 9~12, or No.4
13~16, then press [START]. The darker level
sample sheet will be output.
Select the desired darker exposure from the
sample sheet(s), then touch the density number
from 1 to 16.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode