Konica Minolta 7130 - Manual (Page 36)

Machine Configuration (continued)
2-6
Basic Screen
The Basic Screen displays when copying operation becomes available after warm-up.
1 SETTING key is selected when the screen displays basic copying conditions.
Touch this key to return to the current print job settings when making selections for
a reserve job.
When any trouble occurs during a reserve setting, “SETTING” changes to flashing
“JAM” or “ADD PAPER” according to the problem. See p. 5-7 to p. 5-9.
2 Icon area displays the following icons.
: ADD TONER icon is displayed when toner supply becomes low.
: PM CALL icon is displayed when preventive maintenance is due.
: FINISHER MODE icon is displayed when a
specific finisher mode is selected. When Staple mode is selected, this icon indi-
cates the number of staples and staple position.
: ROTATION icon is displayed when the Rotation is automatically functioning.
3 Message area displays the machine status and procedure required at that time.
4 RESERVE key is touched to select copy conditions for a subsequent job while the
current scan/print job is in progress.
5 JOB LIST key is touched to view the current job status, to change the printing
order of reserve jobs, or to cancel printing a reserve job.
1 SETTING key
2 Icon area
3 Message area
4 RESERVE key
5 JOB LIST key
6 Job No. icon
7 COUNT/SET
indicator
8 Memory indicator
9 SCAN key
10 Paper size/type
indication area
11 SIZE setting area 13 DENSITY setting area
14 MODE setting area
12 LENS setting area