Konica Minolta 7130 - Manual (Page 257)

[4] E.C.M. (Electronic Copy Monitor) (continued)
11-21
(3) Touch DEL. to delete the input character
from the last.
(4) Touching CANCEL on the Name Input
Screen will clear all the input characters.
(5) To change the existing name, touch DEL. to
delete it and enter the new name.
6 Touch OK on the Name Input Screen to return to
the ECM Data Input Screen.
7 Touch Limit. Limit key will be highlighted,
enabling you to immediately enter copy limit.
8 Enter a 6-digit copy limit for the ID No. using the
keypad on the control panel. The input copy limit
will be displayed on the right of the copy count.
NOTES:
1. If an invalid copy limit is entered, continue by
entering the valid 6-digit copy limit.
2. Entering “000000” signifies no copy limit.
3. The Clear key, though it clears copy count, does
not function on the ECM Data Input Screen.
9 Touch OK to complete the settings and return to
the ECM Setting Menu Screen.
When the same ECM password has been used
for another ID No., the Password Duplication
Screen will be displayed. To re-enter new
password, touch YES and return to the step 5.
To create duplicate password, touch NO, then
touch OK.
NOTE:
It is possible to assign the same ECM password to
different ID Numbers. Note, however, that the
number of copies will be counted only for the ECM
password with the smallest ID No. Copy count for the other ID Numbers will not be
monitored.
We recommend you do not use duplicate ECM password.
10 If other ECM setting changes are required, touch the desired key.
11 Touch RETURN to restore the Key Operator Mode Screen.
12 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode