Konica Minolta 7130 - Manual (Page 76)

Copying Using Memory (continued)
3-26
7.
Touch SCAN on the Basic Screen to scan.
DETAILS
Repeat steps 6 and 7 until all originals are scanned.
Memory indicator on the upper right of the Basic Screen allows you to
check the remaining memory.
To delete the scanned data without printing, press [STOP/CLEAR].
HINT
Should memory overflow occur frequently, it is recommended that you
contact your service representative to extend the memory capacity in your
machine.
8.
Press [START] to print.
All the data in memory will be output.
Press [STOP/CLEAR] to suspend the printing job.
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.