Konica Minolta 7130 - Manual (Page 274)

[9] Weekly Timer (continued)
11-38
[4] Lunch Hour Off Function
The Weekly Timer function turns the copier ON and OFF once a day. Use this Lunch
hour off function to shut down power for lunch break then turn on again while the
copier is turned on due to the Weekly Timer function. The only one off time interval
can be programmed.
Weekly Timer Setting Menu Screen Lunch Hour Off Setting Screen
Procedure
1 Touch [4] Lunch hour off setting to display the Lunch Hour Off Setting Screen.
2 Use the procedure below to activate the Lunch hour off function.
(1) Touch Function ON to highlight it.
(2) Touch off-time.
Enter a 2-digit off-hour (ex. 9 a.m. is 09) and a 2-digit off-minute (ex. 7 min. is 07)
using the control panel keypad.
(3) Touch on-time.
Enter a 2-digit on-hour and a 2-digit on-minute using the control panel keypad.
3 Touch Function OFF to de-activate the Lunch hour off function. The time setting area
will appear grayed out and cannot be selected.
The Function OFF setting is the factory default setting.
4 Touch OK to complete the setting and return to the Weekly Timer Setting Menu
Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.