How to access the key operator mode, To display the key operator mode screen – Konica Minolta 7130 User Manual
Page 238
11-2
How to Access the Key Operator Mode
The Key Operator is trained to handle all special Key Operator functions that are not
accessible to the general user, such as monitoring overall copier activity, machine
performance, and service information, modifying machine settings, and controlling
user activity, for billing purposes.
A unique 4-digit Key Operator password is normally set by service at installation. If the
unique code is not set by service, the copier will not display Key Operator Password
Entry Screen when the Key Operator mode is being accessed, and a Key Operator
password will not be required. A service-set 8-digit ECM master key code must be
entered by the Key Operator to access the Electronic Copy Monitor functions, and a
service-set 4-digit Weekly Timer master key code must be entered by the Key Opera-
tor to access the Weekly Timer functions.
To ensure the security of Key Operator mode, it is recommended that you establish
a unique Key Operator password, along with the Key Operator ECM master key
code and Weekly Timer master key code, and keep them in a confidential file.
To Display the Key Operator Mode Screen
1.
Press [HELP] on the control panel to display the Help Screen.
2.
Touch Key-Ope mode on the Help Screen.
3.
Use the keypad on the touch screen to enter your 4-digit Key Opera-
tor password; then touch OK.