Konica Minolta 7130 - Manual (Page 253)

[3] Preset Key (continued)
11-17
[2] Magnification
The preset and userset ratios are used to reduce and enlarge the original image to
accommodate copy paper size, and are available on the Basic Screen.
NOTE:
Normally, users are allowed to change the three USERSETs in the bottom
line on the Userset Magnification Setting Screen. The preset keys in the
top and middle lines can also be programmed in 2-5 DIPSW mode;
however, changing them is not recommended.
❒ Setting options:Userset or Preset ratio
❒ Default setting: USERSET1: 4.00
USERSET2: 2.00
USERSET3: 0.50
Preset Key Setting Menu Screen Userset Magnification Setting Screen
Procedure
1 Touch [3] Preset key on the Key Operator Mode Screen to display the Preset Key
Setting Menu Screen.
2 Touch [3] Magnification to display the Userset Magnification Setting Screen.
3 Touch the USERSET you want to change, then enter a ratio from 0.25~4.00, using the
keypad.
If a ratio under 0.25 is entered, 0.25 will be displayed.
If a ratio over 4.00 is entered, 4.00 will be displayed.
4 Touch OK to complete the setting and return to the Preset Key Setting Menu Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode