Konica Minolta 7130 - Manual (Page 182)

8-44
Repeating Selected Image Area (Repeat: Verti./Horiz. Mode)
Use this function to repeat the selected image area of 10mm ~ 150mm in both vertical
and horizontal widths measured from the rear left corner of the 11”x17” original area
indicated on the left edge of the platen glass.
>>>Vertical/Horizontal Width Setting Mode Specifications<<<
❒ Use the platen glass. (Document feeder cannot be used.)
❒ Incompatible Conditions: Using RADF, 2a2, 2a1, APS, AMS, Sort, Staple, Group,
Rotation Sort, Rotation Group, Sheet/Cover Insertion, Chapter, Combination,
Booklet, Transparency, Image Insert, Book Copy, Special Original (Mixed Original,
Folded Original, Non-Standard Size, Upside Down), Frame/Fold Erasure, AUTO
Layout, Image Shift, Non-Image Area Erase, Stamp
1.
Press [APPLICATION] on the control panel.
Reminder!
When starting a new copying job, be sure to close the RADF securely, then
press [AUTO RESET].
Vertical
width
Horizontal width
Repeat copy
Vertical/Horizontal Width Setting mode
2 3 1
5 6 4
8 9 7
0
CLEAR QTY.
STAR
CHECK
HELP
AUTO RESET
OUTPUT
APPLICATION
SCANNER / PRINTER FAX
DATA
INTERRU