Sanyo PLC-WXE46 User Manual
Page 48

PLC-WXE46/WXL46
Expand Serial Command Functional Specifications
48/65
9.7 Input Status Read Command
9.7.1
CR_INPUT Command
Command “CR_INPUT”[CR]
Details
Get selected INPUT No.
Response
Acceptable
“000_%1”[CR]
Request data
“1”-”3”
Unacceptable “Error Code”[CR]
9.7.2
CR_SOURCE Command
Command “CR_SOURCE”[CR]
Details
Get selected Source
Response
Acceptable
“000_%1”[CR]
Request data
“ANALOG” ---------- Analog (RGB) Input is selected
“SCART” ------------- SCART is selected
“VIDEO” -------------- Video Input is selected
“S-VIDEO” ----------- S-Video Input is selected
“YPBPR” ------------- Component Input is selected
“AUTO” --------------- Video Auto is selected
Unacceptable “Error Code”[CR]
9.7.3
CR_SRCINP1 Command
Command "CR_SRCINP1” [CR]
Details
Get selected source of Input 1
Response
Acceptable
“000_%1”[CR]
Request data
“ANALOG” --------- Analog Input is selected
“YPBPR” ----------- YPBPR Input is selected
“SCART” ----------- Scart Input is selected
Unacceptable “Error Code”[CR]
9.7.4
CR_SRCINP2 Command
Command "CR_SRCINP2” [CR]
Details
Get selected source of Input 2_CMP2
Response
Acceptable
“000_%1”[CR]
Request data
“ANALOG” --------- Analog Input is selected
“OUT” --------------- Monitor out is selected
Unacceptable ““Error Code”[CR]