Sanyo PLC-WXE46 - Manual (Page 24)

PLC-WXE46/WXL46 Expand Serial Command Functional Specifications
24/65
8.6.3 CF_INPUT1 Command
Command “CF_INPUT1_%1_”[CR]
%1
“ANALOG” ----------Select Analog RGB Input
“YPBPR” ------------- Select Component
“SCART” ------------- Select SCART
Details
Select Computer 1 input and source specified in %1 at the same time.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6.4 CF_INPUT2 Command
Command “CF_INPUT2_%1_”[CR]
%1 “ANALOG” ---------- Select Analog RGB Input
Details
Select Computer 2 input and source specified in %1 at the same time.
This command is available in normal Power ON status.
Projector returns “101” by selecting Computer 2 while Monitor out is selected in
Terminal menu.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6.5 CF_INPUT3 Command
Command “CF_INPUT3_%1_”[CR]
%1
“AUTO” ------------------ Select Auto Input
“VIDOE” ----------------- Select Composite video Input
“S-VIDEO” -------------- Select S-video Input
Details
Select Videoinput.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.6.6 CF_INPUT_%1_%2 Command
Command “CF_INPUT_%1_%2”[CR]
%1
“COMPUTER1” ------ Select Computer1 Input
“COMPUTER2” ------ Select Computer2 Input
“VIDEO” -------------- Select Analog Input
%2
When %1 is COMPUTER1
“ANALOG” ----- Select Analog RGB Input
“YPBPR” -------- Select Component Input
“SCART” -------- Select SCART Input
When %1 is COMPUTER2
“ANALOG” ----- Select Analog RGB Input
When %1 is VIDEO
“AUTO” ---------- Select Video Auto Mode
“VIDEO” --------- Select Video Input
“S-VIDEO” ------ Select S-Video Input
Details
Select Input specified by %1 and also Source specified by %2
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]