Sanyo PLC-WXE46 - Manual (Page 31)

PLC-WXE46/WXL46 Expand Serial Command Functional Specifications
31/65
8.9 Sound Command
8.9.1 CF_VOLUME Command
Command “CF_VOLUME_%1”[CR]
%1
“000-063” -------------------------- Directly select Volume setting value
“UP” --------------------------------- Current Volume setting value +1
“DN” --------------------------------- Current Volume setting value -1
Details
Control Volume value
The same operation of Volume Up/Down of RC, and directly specify Volume value.
When setting Volume value, the Sound Mute becomes canceled as is in RC
operation. The value set by this command is stored in Projector.
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]
8.9.2 CF_MUTE Command
Command “CF_MUTE_%1”[CR]
%1
“ON” ----------------------------- Set Sound Mute to ON
“OFF” --------------------------- Set Sound Mute to OFF
Details
Control Sound Mute ON/OFF
This command is available in normal Power ON status.
Response
Acceptable “000”[CR]
Unacceptable “Error Code”[CR]