Specifications – Sharp MD-C2H User Manual
Page 55
SPECIFICATIONS
As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
●
MiniDisc recorder section
Type:
3-disc multi-play MiniDisc re-
corder
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
Audio channel:
Stereo; 2 channels
Monaural (Playback only);
1 channel (long-time recording
mode)
Frequency
response:
20 - 20,000 Hz
Rotation speed:
400 - 900 rpm CLV, Approx
Quantization:
16-bit linear (CD recording)
20-bit linear
(Analogue recording)
Error correction:
ACIRC (Advanced Cross Inter-
leave Reed-Solomon Code)
Coding:
ATRAC (Adaptive TRans-
formed Acoustic Coding)
Recording method:
Magnetic field modulation over-
write method
D/A converter:
1-bit D/A converter
Sampling frequency:
44.1 kHz
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
Signal/noise ratio:
95 dB (1 kHz)
Dynamic range:
90 dB (1 kHz)
●
Compact disc player section
Type:
3-disc multi-play compact
disc player
Signal readout:
Non-contact, 3-beam semi-
conductor laser pickup
Rotation speed:
200 - 500 rpm CLV, Approx.
Error correction:
CIRC (Cross Interleave Reed-
Solomon Code)
Quantization:
16-bit linear
D/A converter:
1-bit D/A converter
Frequency
response:
20 - 20,000 Hz
Signal/noise ratio:
95 dB (1 kHz)
Dynamic range:
90 dB (1 kHz)
Wow and flutter:
Unmeasurable
(less than 0.001% W. peak)
●
Tuner section
Frequency range:
FM; 87.5 - 108 MHz
AM; 522 - 1,620 kHz
Sensitivity:
FM; 2.5
µ
V
(75 ohms unbalanced)
AM; 650
µ
V/m
●
Cassette deck section
Type:
Compact cassette tape
Frequency response:
50 - 14,000 Hz (Normal tape)
Motor:
DC motor with electronic governor
×
1
Signal/noise ratio:
50 dB (Recording/Playback)
Bias and erasure
system:
AC
Tape speed:
4.76 cm/sec. (1-7/8 ips.)
Wow and flutter:
0.15 % (WRMS)
Heads:
Record/playback
×
1
Erase
×
1
●
General
Power source:
AC 230 V, 50 Hz
Power consumption:
95 W
Output power:
RMS; 100 W (50 W + 50 W)
(10 % T.H.D.)
RMS; 86 W (43 W + 43 W)
(0.9 % T.H.D.)
Input terminals:
Auxiliary (Analogue);
500 mV/47 kohms
Output terminals:
Headphones; 16 - 50 ohms
(recommended; 32 ohms)
Speakers; 6 ohms
Dimensions:
Width; 270 mm (10-11/16")
Height; 352 mm (13-7/8")
Depth; 376 mm (14-13/16")
Weight:
8.6 kg (19.0 lbs.)
●
Speaker section
Type:
3-way type [130 mm (5-1/8") woofer,
50 mm (2") tweeter and super
tweeter]
Maximum input power: 100 W
Rated input power:
50 W
Impedance:
6 ohms
Dimensions:
Width; 220 mm (8-11/16")
Height; 352 mm (13-7/8")
Depth; 260 mm (10-1/4")
Weight:
3.2 kg (7.1 lbs.)/each
MD-C2H(SUK) TINSE0238AWZZ
54