Sharp MD-C2H - Manual (Page 33)

(Continued)
■
Recording from CDs onto MiniDiscs
(One-Touch Editing)
You can record from up to three CDs onto three MiniDiscs with
a one-touch operation.
When multiple CDs are recorded onto MiniDiscs, the contents of
a particular CD can be recorded onto the MiniDisc which has the
same disc number as the CD.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load compact discs and recordable MiniDiscs.
● The total number of tracks and the total playing time will be
displayed for the CD whose red frame is flashing.
● When a new recordable MiniDisc is loaded, it will take about
15 seconds to enter the recording stand-by mode.
4
Press the CD 0 MD EDIT button.
● When CD 1, CD 2 and CD 3 are recorded onto MD 1, MD
2 and MD 3, recording will start from the first track on CD 1
and continue in order.
①
CD 1 is selected.
②
The unit will start recording the contents of CD 1 onto MD 1.
③
After recording on MD 1 has finished, the track numbers will
be written to MD 1. Then, CD 2 will be selected.
④
The unit will start recording the contents of CD 2 onto MD 2.
⑤
After recording on MD 2 has finished, the track numbers will
be written to MD 2. Then, CD 3 will be selected.
⑥
The unit will start recording the contents of CD 3 onto MD 3.
⑦
After recording on MD 3 has finished, the track numbers will
be written to MD 3 and the unit will stop.
● When the recordings on MD 1 through MD 3 have been com-
pletely finished, the CD and the MD will be stopped automat-
ically, and the track numbers will be written to the MD.
To stop recording:
Press the ■ button.
● Playback and recording will stop and the track numbers will
be written on the MD.
It is not possible to pause in the recording mode.
Note:
● Only the tracks from the CD with the same disc number as
a MiniDisc can be recorded.
When the available recording time on the MiniDisc is con-
sumed, the CD will stop, even if there is more playing time
left on the CD. Then, the unit will start recording from the first
track on the next CD onto the next MD.
1
2
4
3
3
4
①
②
③
④
⑤
⑥
⑦
(Main unit operation)
The unit will start recording the contents of
CD 1 (2) (3) onto MD 1 (2) (3).
(Example: When three CDs and three
MDs are loaded)
MD-C2H(SUK) TINSE0238AWZZ
32