Continued) – Sharp MD-C2H User Manual
Page 53
2
HK
(Continued)
When an error message is displayed, proceed as follows:
Error messages
Meaning
Remedy
BLANK MD
●
Nothing is recorded.
●
Replace it with another disc.
Can’t EDIT
●
A track cannot be edited.
●
Change the stop position of the track and then
try editing it.
Can’t REC
●
Recording cannot be performed correctly due
to vibration or shock in the unit.
●
The tape is protected against accidental
erasure.
●
Re-record or replace the MiniDisc.
●
Cover the accidental erase prevention hole.
CD NO DISC
●
A CD has not been loaded.
●
The disc data cannot be read.
●
Load a CD.
●
Reload the CD.
DEFECT
●
Since this disc has scratches on it, the recor-
ding operation was skipped.
●
Replace it with another recordable disc.
DISC FULL
●
The MiniDisc is out of recording space.
●
Replace it with another recordable disc.
EDIT OVER
●
There is no space to make CD editing on the
disc.
●
Replace it with a disc that has enough time
to record.
FOCUS ERR
●
A disc has not been loaded.
●
The disc data cannot be read.
●
Reload the MiniDisc.
MD
∗∗
ERR
(
∗
:Number or
symbol)
●
The disc is damaged.
●
A TOC is not written on the MD or there is
something wrong with data.
●
Reload the disc or replace it.
MD ERR
●
Trouble is found.
●
Contact the shop where you purchased the
unit.
MD NO DISC
●
A MiniDisc has not been loaded.
●
The disc data cannot be read.
●
Load a MiniDisc.
●
Reload the MiniDisc.
MECH
∗
ERR
(
∗
:Number or
symbol)
●
There is a mechanical problem and the disc
is not working properly.
●
Set this unit to the stand-by mode and press
the MD EJECT button.
NAME FULL
●
The number of characters for the disc name
or track name exceeds 40.
●
Shorten the disc or track name.
NOT AUDIO
●
The data recorded on this disc is not audio
data.
●
Select another track.
●
Replace the disc.
PLAY MD
●
You tried to record on a playback-only.
●
Replace it with another recordable disc.
PROTECTED
●
The disc is write protected.
●
Move the write protection tab back to its orig-
inal position.
TEMP OVER
●
The temperature is too high.
●
Set this unit to the stand-by mode and wait
for a while.
TOC
∗∗
ERR
(
∗
:Number or
symbol)
●
The disc is damaged.
●
TOC information cannot be read.
●
MD not specified.
●
Replace it with another disc.
TOC FULL
∗
(
∗
:Number or
symbol)
●
There is no space left for recording character
information (track names, disc names, etc.).
●
Replace it with another recordable disc.
TOC W ERROR
●
Recording is impossible.
●
Contact the shop where you purchased the
unit.
TRAY ERROR
●
The CD tray operates incorrectly.
●
Unplug the AC power lead, plug it back, and
then turn the power on.
MD-C2H(SUK) TINSE0238AWZZ
52