beautypg.com

Sharp MD-C2H User Manual

Page 23

background image

(Continued)

To recall stations that have been stored in
memory (PTY search)

You can search a desired stations by specifying the programme
type (news, sports, traffic programme, etc. ... see page 18) from
among the stations that have been stored in memory.
(ASPM is convenient for storing stations in memory.)

1

Press the ON/STAND-BY button to turn the power on.

2

Press the TUNER (BAND) button.

3

Press the TUNER (BAND) button to select the FM ST or FM
band.

4

Press the PTY.TI SEARCH (PTY.TI) button.

"PTY TI" and "SELECT" will appear alternately for about 6 sec-
onds.

5

Within 6 seconds, turn the jog dial on the main unit or press
the PRESET (

X

or

W

) button on the remote control to select

the programme type you want.

Each time the button on the remote control is pressed, the
programme type will appear. If the button is held down for
more than 0.5 seconds, the programme type will appear con-
tinuously.

6

Whilst the selected programme type is flashing (within 4 sec-
onds), press the PTY.TI SEARCH (PTY.TI) button again.

After the name of the selected programme type has been lit
for 2 seconds, "SEARCH" will appear, and the search operation
will start.

Note:

2,3

4,6

5

1

5

2,3

4,6

1

4

5

6

If the programme type has changed from flashing to steadily lit
and the PTY.TI SEARCH (PTY.TI) button is pressed, nothing will
happen. In this case, start again from step 4.
Each time a station of the programme type you want is en-
countered, you will be able to listen to the broadcast.

The channel number will flash for about 3 seconds. The station
name will flash for 7 seconds, and then remain lit.

If you want to listen to another station of that programme type,
press the PTY.TI SEARCH (PTY.TI) button whilst the channel
number or station name is flashing. The unit will look for the
next station of that type.

Note:

If no station of the programme type you want can be found,
"NOT FOUND" will appear for 4 seconds.

If you have selected the traffic programme:

If you select traffic programme (TP) as the programme type in
step 5, to receive only radio stations which broadcast traffic pro-
grammes, the TP will appear. (However, this does not necessarily
mean that you will hear any traffic announcements at that time.)
When a traffic announcement is actually being made, the TA will
appear.
(When both the TP and TA will appear, an announcement is
being made.)

MD-C2H(SUK) TINSE0238AWZZ

22